2026 Ford Ranger RA XLT 4x2 Hi-Rider Double Cab Pick-up 2.0L bi-turbo diesel 10AT towing capacity, GVM, GCM and payload
2.0L bi-turbo diesel | 2wd | automatic
Important specification notes
Configuration-specific kerb, tare, payload, GVM, GCM, axle ratings, braked towing, wheelbase and fuel capacity transcribed from the Australian Ford Ranger 2026MY specification brochure. These initial-MY records are kept separate from the later MY2026.50 revision. | Max towball download 350kg conditional on Genuine Ford Tow Pack for 3500kg braked towing configuration. Source: Ford Australia Ranger towing guide (ford.com.au).
Partial specifications — you can still start
Unavailable: Unbraked towing capacity.
Use the sourced figures shown below, then enter any missing ratings from documentation for your exact vehicle when completing your assessment. Customer-entered figures are not independently verified. Leave unknowns blank: affected checks cannot be assessed, and this page is not a complete setup clearance.
A weighbridge establishes actual loads, not permitted limits. Do not substitute figures from another year or variant.
Quick specifications
Braked towing capacity
3500 kg
Dated Ford Australia exact-model-year specification
Unbraked towing capacity
Not available from the currently verified source.
Not available from currently verified sources
Maximum towball download
350 kg
Dated Ford Australia exact-model-year specification
Kerb mass
2173 kg
Kerb-mass definition requires confirmation
Dated Ford Australia exact-model-year specification
Tare mass
2109 kg
Verified record source
GVM
3250 kg
Dated Ford Australia exact-model-year specification
GCM
6250 kg
Dated Ford Australia exact-model-year specification
Payload
1077 kg
Calculated from verified GVM minus verified kerb mass
Verified record source
Front axle rating
1490 kg
Dated Ford Australia exact-model-year specification
Rear axle rating
1959 kg
Dated Ford Australia exact-model-year specification
Wheelbase
3270 mm
Verified record source
How ClearPath verifies this page
ClearPath verifies vehicle specifications field by field. Manufacturer documentation is preferred, but where manufacturers do not publish a particular specification, ClearPath may use recognised technical or independent Australian sources and identifies that source clearly. Calculated values are labelled separately. We do not estimate missing manufacturer limits.
Can this vehicle really tow its headline capacity?
The braked towing capacity is only one constraint. The complete setup must also remain within the applicable GVM, GCM, towball, front axle, rear axle, towbar, coupling and tyre limits. Passengers, luggage, accessories and towball load consume vehicle capacity.
Payload and accessory impact
Bullbars, winches, canopies, drawers, auxiliary batteries, long-range fuel, recovery equipment, roof loads, passengers and towball download all contribute to the loaded vehicle. Check actual fitted weights and positions rather than relying on advertised payload alone.
Specification source
Ford Australia Ranger 2026MY specification brochure - configuration-specific vehicle masses, dimensions and towing tables; Ford Australia Ranger towing guide
Source type: manufacturer_specification | Confidence: high | Last verified: 2026-09-18
View cited sourceAdvisory limitation
Confirm the figures against the exact vehicle compliance information and current manufacturer documentation. Modifications or approvals may change applicable ratings. ClearPath does not certify legality, roadworthiness or engineering compliance.