2026 Mazda BT-50 XT Dual Cab Pickup 3.0L Diesel 4x4 6AT (June 2026 range) towing capacity, GVM, GCM and payload
3.0L I4 turbo diesel with Idle Stop System (2999 cc) | 4wd | automatic
Important specification notes
Exact June 2026 Australian range specification, not a blanket carryover to older B19/B30-coded records. Factory pickup kerb includes full fluids and fuel; options/accessories add weight. Towing and towball limits conditional on Mazda Genuine Towing Kit and applicable State/Territory rules. Actual loaded vehicle/axle weights and vehicle-specific compliance documentation must be checked.
Partial specifications — you can still start
Unavailable: Tare mass.
Use the sourced figures shown below, then enter any missing ratings from documentation for your exact vehicle when completing your assessment. Customer-entered figures are not independently verified. Leave unknowns blank: affected checks cannot be assessed, and this page is not a complete setup clearance.
A weighbridge establishes actual loads, not permitted limits. Do not substitute figures from another year or variant.
Quick specifications
Braked towing capacity
3500 kg
Manufacturer verified
Unbraked towing capacity
750 kg
Manufacturer verified
Maximum towball download
350 kg
Manufacturer verified
Kerb mass
2015 kg
Manufacturer kerb mass; confirm the source definition for the exact vehicle
Manufacturer verified
Tare mass
Not available from the currently verified source.
Not available from currently verified sources
GVM
3100 kg
Manufacturer verified
GCM
6000 kg
Manufacturer verified
Payload
1085 kg
Manufacturer-stated payload
Manufacturer verified
Front axle rating
1450 kg
Manufacturer verified
Rear axle rating
1910 kg
Manufacturer verified
Wheelbase
3125 mm
Manufacturer verified
How ClearPath verifies this page
ClearPath verifies vehicle specifications field by field. Manufacturer documentation is preferred, but where manufacturers do not publish a particular specification, ClearPath may use recognised technical or independent Australian sources and identifies that source clearly. Calculated values are labelled separately. We do not estimate missing manufacturer limits.
Can this vehicle really tow its headline capacity?
The braked towing capacity is only one constraint. The complete setup must also remain within the applicable GVM, GCM, towball, front axle, rear axle, towbar, coupling and tyre limits. Passengers, luggage, accessories and towball load consume vehicle capacity.
Payload and accessory impact
Bullbars, winches, canopies, drawers, auxiliary batteries, long-range fuel, recovery equipment, roof loads, passengers and towball download all contribute to the loaded vehicle. Check actual fitted weights and positions rather than relying on advertised payload alone.
Specification source
Mazda Australia BT-50 brochure, published June 2026 AU41-P00007700, physical pp.13-17 and25
Source type: manufacturer_spec_sheet | Confidence: high | Last verified: 2026-09-14
View cited sourceAdvisory limitation
Confirm the figures against the exact vehicle compliance information and current manufacturer documentation. Modifications or approvals may change applicable ratings. ClearPath does not certify legality, roadworthiness or engineering compliance.